Please wait ...



Installation Instructions

Mural installation step 1

Step 1

Your wall mural will be supplied in panels. Lay the panels out in order and leave to rest for at least 5 hours. Make sure that you check over your mural carefully when you open it. It is recommended that you work left from right.

Mural installation step 2

Step 2

Create a guideline using a spirit level and tape measure by drawing a straight line horizontally, a panel’s width in from the edge of the wall. Remember to deduct the measurement of the bleed/extra bit of paper. This will help you guide your panel into place to ensure it’s applied straight.

Mural installation step 3

Step 3

Take your first panel and carefully peel a small amount of the top of the mural from the backing paper. Apply the top of the panel to the wall, ensuring that the right hand edge aligns with your vertical line. Carefully peel away the rest of the mural from the backing paper and gently apply it to the wall working down towards the bottom of the panel. If you need to re-position any part of the panel, simply peel the appropriate amount away from the wall and re-apply. Gently smooth out the mural as you go.

Mural installation step 4

Step 4

Apply the second and subsequent panels, making sure that that the panels are laid are edge to edge – without overlapping and without leaving any gaps. Ensure that the pattern or image matches up as you apply each panel.

Mural installation step 5

Step 5

When all panels have been installed, carefully trim the top, bottom and far left and right sides of your mural with a sharp blade.

Watch a video